The color is iridescent. It changes color depending on the angle and lightning. It's so cool.

What board is that

What keyboard is it? The colors are a really great combo!

I'm really not an RGB guy, but something about pudding caps is so cool. The black on black is great!

It’s like hirosart I don’t remember.

No it’s just a resin keycap I bought from Etsy.

Is the escape key a green marble design?

ANY content that features products, services you sell, your prototypes in progress or items you were sponsored to post MUST use the Promotional flair, with disclosure of who you represent.

When posting your build, please provide a description of the build, preferably as a Top Level Comment or Reply to this Comment, with the following information:

• Your keyboard featured and its layout

• The Switches, Keycaps, and Other Accessories Featured

• Any notable mods you performed

• Other helpful information such as low profile, lesser known firmware, etc.

Example: Unobtanium Southpaw 1800 with DSA Salt with MorningCaps Artisan and Alps Rainbow Switches, modded with Sorbothan Foam on KMK

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

ANY content that features products, services you sell, your prototypes in progress or items you were sponsored to post MUST use the Promotional flair, with disclosure of who you represent.

When posting your build, please provide a description of the build, preferably as a Top Level Comment or Reply to this Comment, with the following information:

• Your keyboard featured and its layout

• The Switches, Keycaps, and Other Accessories Featured

• Any notable mods you performed

• Other helpful information such as low profile, lesser known firmware, etc.

Example: Unobtanium Southpaw 1800 with DSA Salt with MorningCaps Artisan and Alps Rainbow Switches, modded with Sorbothan Foam on KMK

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

Doggo looks like it is very excited for build

I have the same keyboard except different color. Honestly the layout is amazing and I have been so much more productive with it as a software engineer. This keyboard with the Mx Master 3 from Logitech on a Macbook Pro has been my setup for years now.

I do remember being pissed off at the layout in the beginning, but now I'm pissed off when I have to work without it.

ANY content that features products, services you sell, your prototypes in progress or items you were sponsored to post MUST use the Promotional flair, with disclosure of who you represent.

When posting your build, please provide a description of the build, preferably as a Top Level Comment or Reply to this Comment, with the following information:

• Your keyboard featured and its layout

• The Switches, Keycaps, and Other Accessories Featured

• Any notable mods you performed

• Other helpful information such as low profile, lesser known firmware, etc.

Example: Unobtanium Southpaw 1800 with DSA Salt with MorningCaps Artisan and Alps Rainbow Switches, modded with Sorbothan Foam on KMK

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

ANY content that features products, services you sell, your prototypes in progress or items you were sponsored to post MUST use the Promotional flair, with disclosure of who you represent.

When posting your build, please provide a description of the build, preferably as a Top Level Comment or Reply to this Comment, with the following information:

• Your keyboard featured and its layout

• The Switches, Keycaps, and Other Accessories Featured

• Any notable mods you performed

• Other helpful information such as low profile, lesser known firmware, etc.

Example: Unobtanium Southpaw 1800 with DSA Salt with MorningCaps Artisan and Alps Rainbow Switches, modded with Sorbothan Foam on KMK

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

Following up from the other day... Rebuilt the Tokyo60 kit (Coyote colorway, which, when did Coyote become a thing?), this time with:

• Gateron Ink Baby Kangaroo switches (like them more than the Halo Clear switches, but they’re not my absolute favorite; may redo it yet again, when I lube the stabilizers, with maybe Boba U4T switches?)
• NovelKeys screw in stabilizers replacing the stock ones from the kit, which were totally tweaked and basically unusable
• DROP + Tokyo Season 4 Dyesub PBT keycaps for the HHKB layout
• Generic M2-0.4 mm screws (4mm length) to mount the board to the case (missing from the used kit I bought)
• Nillkin keyboard risers (“feet”) affixed with adhesive to the bottom of the board. I probably could have gone with something fixed (I’m just using these without the collapsible feet extended, to get like 6mm tilt up for the back edge), but I didn’t know that before I tried these...

I could not initially figure out how the inserts were supposed to go into the sleeves but after watching some lubing videos I figured it out (and it's obvious in hindsight). Next up, I suppose: Actually getting some lube and finishing the stabilizers (I’m just running them dry for now). This is my first non-prebuilt, and it’s been a fun learning experience!

If anyone’s supremely bored...

ANY content that features products, services you sell, your prototypes in progress or items you were sponsored to post MUST use the Promotional flair, with disclosure of who you represent.

When posting your build, please provide a description of the build, preferably as a Top Level Comment or Reply to this Comment, with the following information:

• Your keyboard featured and its layout

• The Switches, Keycaps, and Other Accessories Featured

• Any notable mods you performed

• Other helpful information such as low profile, lesser known firmware, etc.

Example: Unobtanium Southpaw 1800 with DSA Salt with MorningCaps Artisan and Alps Rainbow Switches, modded with Sorbothan Foam on KMK

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

Once you go 40% and get a layout working for you, you'll never go back.

Try putting the numbers on a layer under home row, F-keys on the bottom row and the shifted symbols on QWERTY. It works well once you get used to it! Even better if you use one of the spacebars as an FN key to toggle that layer.

Great job with the build BTW! I'd love to build one of these if only it had a few more keys on the right side like my MiniVan.

As someone who also went down the same path with the exact same Filco but a TKL, you'll find it considerably more comfortable typing on a smaller keyboard once you adjust to the layout.

I much prefer the new accented colors Fujitsu provides than the older and darker red/blue combo.

Enjoy being one with cup rubber!

Yeah this was really a jump for me. I've never used anything other than full sized. I had a TKL for a week but it had blues and was my first experience with blues so I didn't keep it.

It really feels premium and if it doesn't work out I won't lose much on it. But so far it's extremely easy to adjust to, I just made delete backspace and changed the windows buttons to windows buttons and an addition function.

My only gripe is I have to figure out a new push to talk key for discord. I am debating going with the windows key, or making it something like a 2 key press, but right now I'm trying out voice activation which I'll probably hate. We'll see!

I have been Topre-curious for a little while now. I'm particularly drawn to the HHKB due to the layout. I'm generally much more interested in 40/ortho/split/weird stuff, but every time I see the HHKB it calls to me.

It's just a lot of money to take a chance on and I have no idea how I could try one without buying. For now I'll live vicariously through you.

I hope you enjoy your new keeb!

> Haimu: Heartbeat, Whisper, WS Silent Linear/Tactile

thanks for the recommendation. Are they more quiet than the Bobas? Less mushiness would be nice, although my main concern is still the noise

Keyboard: Drop CTRL High-Profile Barebones (TKL)

Switches: Kailh Pro Purple

Key caps: GMK Bread

ANY content that features products, services you sell, your prototypes in progress or items you were sponsored to post MUST use the Promotional flair, with disclosure of who you represent.

When posting your build, please provide a description of the build, preferably as a Top Level Comment or Reply to this Comment, with the following information:

• Your keyboard featured and its layout

• The Switches, Keycaps, and Other Accessories Featured

• Any notable mods you performed

• Other helpful information such as low profile, lesser known firmware, etc.

Example: Unobtanium Southpaw 1800 with DSA Salt with MorningCaps Artisan and Alps Rainbow Switches, modded with Sorbothan Foam on KMK

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

ANY content that features products, services you sell, your prototypes in progress or items you were sponsored to post MUST use the Promotional flair, with disclosure of who you represent.

When posting your build, please provide a description of the build, preferably as a Top Level Comment or Reply to this Comment, with the following information:

• Your keyboard featured and its layout

• The Switches, Keycaps, and Other Accessories Featured

• Any notable mods you performed

• Other helpful information such as low profile, lesser known firmware, etc.

Example: Unobtanium Southpaw 1800 with DSA Salt with MorningCaps Artisan and Alps Rainbow Switches, modded with Sorbothan Foam on KMK

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

see hhkb official website: Featuring best-in-class Topre electrostatic capacitive switches

wtf u guys lol

hhkb is belongs to "Topre Electric Capacitive Switch mechanism" aka Capacitive keyboard[source] no??