Recent comments in /f/headphones

CertainlySomeGuy t1_je44tdd wrote

Sorry, English is not my first language. I meant that a direct comparison is easier when listening to the song in higher and lower def without a longer pause in-between. It should be obvious, but I just meant it to show how close of a gap it is between high and low def.

I listened to a wide variety of genres and have not testet it with specific songs.

1

RB181 t1_je44cj6 wrote

At this point I find it hard to believe that Spotify Lossless is anything more than false promises to users who are dissatisfied with Spotify's audio quality and considering jumping ship. If you care about audio quality at all, Spotify is one of the worst options.

0

RB181 t1_je43guk wrote

I agree that the difference between lossy and lossless does not exist/matter to most people.

I disagree with your pretentious pointing at a person and claiming that the person in question is full of BS because they don't agree with everything you said.

0

TagalogON t1_je432pu wrote

Look into squig.link and use the AutoEQ feature there, you can compare graphs, easily parametric EQ to a specific target, etc.

Parametric EQ with squig.link, AutoEQ, (Peace) Equalizer APO, et cetera: https://www.reddit.com/r/headphones/comments/11yd6rh/im_a_noob_and_use_spotify_eq_just_had_some/jd772sw/

You can do (parametric) EQ with $8 Neutron Music Player or UAPP on Android. If on PC, the free (Peace) Equalizer APO. There are free apps on Android(/Apple) that can also do a good enough job, but most of them have those graphics sliders instead of parametric or just plug the numbers in EQ. EQ can also be used to help with channel or ear imbalances.

There's also the free Wavelet app that has the AutoEQ available now. And other free apps for more simple graphic sliders EQ, etc.


Try cheap ear tips like FiiO HS18, TRI Clarion, Spinfits, etc. too. Try parametric EQ first as it's free or cheap, lol.

Cheap ear tips (basically FiiO HS18, Spinfit from some AliExpress storefronts, Chinese websites like MTMTaudio/et cetera, and so on) and possibly better soundstage: https://www.reddit.com/r/HeadphoneAdvice/comments/1157giz/upgrade_imaging_with_balanced_cable_iem_or/j90a003/

How to put ear tips on wide nozzles (basically aim it at different angles and force it, be careful not to overdo it as it can damage the core/stem/stalk/etc. of the ear tips): https://www.reddit.com/r/HeadphoneAdvice/comments/125dhs7/i_feel_so_dumb_asking_this_how_do_i_replace_the/je3yez7/

3

Averruncus t1_je417wh wrote

I actually squshed and wrapped my new Focal Clear earpads in cling wrap before storing them for a month to artificially 'season' them.

To me, the difference in sound quality seemed pretty significant, in addition to them being much more comfortable.

1

Icy_Earth_8611 OP t1_je40scm wrote

OP here. Thanks to all for your responses.

This is off topic. I have a pair of Elegia which I love. So, the question is if it's worthwhile spending almost $1,000 for a pair of Clear? Is there any gain to be had for upgrading?

Thanks again.

1

Simeras t1_je3zppb wrote

Yes. I replaced 990 Pro pads yesterday, can confirm that sound change is real and very noticeable. You can find my post in my history I think. There is an useful link in the comments to the measurements of 770 and 990 before and after pad change.

6

rhalf t1_je3z1ig wrote

Ah it's on warranty. That changes things. You should just get it replaced by Philips.

I can't see the part so I can't help you much, but usually this axis goes through the holes from the outside and there's a groove that has a matching ring in the earcup that keeps it from falling out. Then there's a retaining clip on this groove that locks it in place. It may be hard to take it off.

Things like that can be made with DIY methods, and tools are welcome. You know, measuring calipers, a saw, sanding paper and about an hour of free time. You can't just repair it, you need to reconstruct the entire part. You do that with metal tubes or rods and whatever you can think of that you glue together to make that shape. If done right, it's more durable then the original part. OF course people who can model in 3D use printers for that.

2