chopsuwe
chopsuwe t1_j6jyfip wrote
Reply to comment by mtiakrerye in How do I prevent condensation on the windows from causing water to accumulate on the windowsill? by teddythepooh99
Handy but not very good, it works by alternating between heating the air to keep the room warm, then chilling to make the moisture condense in the unit where it can be drained away.
chopsuwe t1_j6jxe93 wrote
Reply to comment by mtiakrerye in How do I prevent condensation on the windows from causing water to accumulate on the windowsill? by teddythepooh99
They have a dehumidify cycle. A stand alone dehumidifier works better though.
Source: NZ, we're famous for our cold, damp, draughty houses with condensation on the windows and mould on every surface.
chopsuwe t1_j6h5sln wrote
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_j6gkjvw wrote
Reply to moving heavy water heater upstairs by j45780
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_j6emyht wrote
Reply to How do I add both a channel drain and expansion joint along existing concrete? by FuzyMuzzy
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_j6aqw95 wrote
Your submission has been removed for one or more of the following reason(s):
- Your post was regarding cooking, cleaning, general maintenance items.
- Your post was regarding sewing, general automotive repairs, cosmetics.
- Your post was regarding software design, CNC, 3D or laser printing.
- Your post was otherwise not considered a good topic fit for this subreddit.
- Please consider submitting these projects to /r/crafts, /r/homeimprovement, /r/woodworking, /r/electronics or /r/findareddit to help you find a subreddit applicable to your project.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_j6aqila wrote
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_j67nw6x wrote
Reply to Large gap under internal door by spicy_falcon
Your submission has been removed for one or more of the following reason(s):
- You're asking what product or tool to buy.
- You're asking about the features, properties or capabilities of a product or material made by someone else.
- You're asking where to buy a product or tool.
- You're asking for suggestions for a product or tool you intend to buy.
We do not permit posts asking for suggestions on materials and tools. This is because of spam.
- /r/DIY is focused on the how, what technique to employ and which tool to use.
- If you need recommendations for a product, you'll probably have better luck in a more specialised subreddit, e.g. /r/HomeImprovement, /r/woodworking, r/helpmefind, etc.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_j67now2 wrote
Your submission has been removed for one or more of the following reason(s):
- Your post was regarding cooking, cleaning, general maintenance items.
- Your post was regarding sewing, general automotive repairs, cosmetics.
- Your post was regarding software design, CNC, 3D or laser printing.
- Your post was otherwise not considered a good topic fit for this subreddit.
- Please consider submitting these projects to /r/crafts, /r/homeimprovement, /r/woodworking, /r/electronics or /r/findareddit to help you find a subreddit applicable to your project.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_j5rb7kh wrote
Reply to Awning Basement Windows Won't Stay Open by Mech2021
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_j5rai2l wrote
Reply to What's wrong with my washer??? by bobpool86
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_j3ancri wrote
Reply to One Milwaukee M18 tool to drill holes on the wall for wall mounting something and to make circular hole on the furniture, and to screw and unscrew? by No_Investigator6039
Your submission has been removed for one or more of the following reason(s):
- You're asking what product or tool to buy.
- You're asking about the features, properties or capabilities of a product or material made by someone else.
- You're asking where to buy a product or tool.
- You're asking for suggestions for a product or tool you intend to buy.
We do not permit posts asking for suggestions on materials and tools. This is because of spam.
- /r/DIY is focused on the how, what technique to employ and which tool to use.
- If you need recommendations for a product, you'll probably have better luck in a more specialised subreddit, e.g. /r/HomeImprovement, /r/woodworking, r/helpmefind, etc.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_j2fmv4o wrote
Reply to Removed a faulty dishwasher, now I have two open ports: the disposal and hot water pressure pipe. I recorkd the disposal port, but I am not sure what part would be best to seal off the opening for the hot water pressure. Probably a simple solution, but I am dumb and new to pipe stuff. picture inside by BlackIronSaturn
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_j2cm8qf wrote
Reply to Why is my toilet hissing? by Sinnedyo
Your submission has been removed for one or more of the following reason(s):
- You are asking how to "get started" on a project.
- You are asking for a review of your overall plan for a project.
- You are asking what is the best method or approach to a project.
- You are asking whether or not you should do a project.
- You are asking for advice on what project you should make ("what can I make within my budget?")
- If you have a project in mind, please do some basic research on the matter, come up with your plan, then you can ask about a specific aspect of the project.
We want you to get the help you're looking for. If you have any of these questions, some places to get help are:
- The Getting Started thread at the top of the subreddit.
- Ask your question in our Discord server in the appropriate channel.
- You may also try other subreddits - /r/homeimprovement, /r/woodworking, /r/electronics or /r/findareddit to help you find a subreddit applicable to your question.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_j26029h wrote
Reply to Thoughts on stained glass film? by UnderstandingTop8951
Your submission has been removed for one or more of the following reason(s):
- You're asking what product or tool to buy.
- You're asking about the features, properties or capabilities of a product or material made by someone else.
- You're asking where to buy a product or tool.
- You're asking for suggestions for a product or tool you intend to buy.
We do not permit posts asking for suggestions on materials and tools. This is because of spam.
- /r/DIY is focused on the how, what technique to employ and which tool to use.
- If you need recommendations for a product, you'll probably have better luck in a more specialised subreddit, e.g. /r/HomeImprovement, /r/woodworking, r/helpmefind, etc.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_j232lrq wrote
Reply to comment by nsa_reddit_monitor in 120v Extension Cord with USB outlets by HardSn0wCrash
My understanding is that stranded wire isn't suitable for use with American outlets as it it tends to squish out from under the screw head when tightened. As long as it can be connected securely it's fine.
chopsuwe t1_j1xkzka wrote
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_j1shu9d wrote
Reply to Garage door seal question. by MJ23isback
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_j12iess wrote
Reply to Balcony door insulation by andisthisonetaken
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_iy0q6v1 wrote
Reply to How can I attach a bidet? by yowmamasita
Your submission has been removed for one or more of the following reason(s):
- You are asking how to "get started" on a project.
- You are asking for a review of your overall plan for a project.
- You are asking what is the best method or approach to a project.
- You are asking whether or not you should do a project.
- You are asking for advice on what project you should make ("what can I make within my budget?")
- If you have a project in mind, please do some basic research on the matter, come up with your plan, then you can ask about a specific aspect of the project.
We want you to get the help you're looking for. If you have any of these questions, some places to get help are:
- The Getting Started thread at the top of the subreddit.
- Ask your question in our Discord server in the appropriate channel.
- You may also try other subreddits - /r/homeimprovement, /r/woodworking, /r/electronics or /r/findareddit to help you find a subreddit applicable to your question.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators).
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_iy0q262 wrote
Your submission has been removed for one or more of the following reason(s):
- You're asking what product or tool to buy.
- You're asking about the features, properties or capabilities of a product or material made by someone else.
- You're asking where to buy a product or tool.
- You're asking for suggestions for a product or tool you intend to buy.
We do not permit posts asking for suggestions on materials and tools. This is because of spam.
- /r/DIY is focused on the how, what technique to employ and which tool to use.
- If you need recommendations for a product, you'll probably have better luck in a more specialised subreddit, e.g. /r/HomeImprovement, /r/woodworking, r/helpmefind, etc.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_ixxnock wrote
Reply to I'm looking for a light that turns on when you open the living room door. When you come home late night from a party or event etc. by jsingh21
Your submission has been removed for one or more of the following reason(s):
- You're asking what product or tool to buy.
- You're asking about the features, properties or capabilities of a product or material made by someone else.
- You're asking where to buy a product or tool.
- You're asking for suggestions for a product or tool you intend to buy.
We do not permit posts asking for suggestions on materials and tools. This is because of spam.
- /r/DIY is focused on the how, what technique to employ and which tool to use.
- If you need recommendations for a product, you'll probably have better luck in a more specialised subreddit, e.g. /r/HomeImprovement, /r/woodworking, r/helpmefind, etc.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_ixxmm9k wrote
Your submission has been removed for one or more of the following reason(s):
- Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.
This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.
-
Please do not use /r/DIY as your first stop for questions - we are not Google.
-
Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.
-
Have you already done some basic research and are still stuck?
-
Please include what research you have done in your question so that others do not repeat your steps.
-
Consider posting your question in the sticky thread at the top of the subreddit.
-
Ask your question in our Discord server in the appropriate channel.
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.
chopsuwe t1_ixtxcki wrote
Come on, the joke wasn't even that good to start with. Surely you've got something better to do with your life than repeating the same joke for the hundredth time.
chopsuwe t1_j6lxsbp wrote
Reply to Does a Heat Pump dehumidify? by [deleted]
Your submission has been removed for one or more of the following reason(s):
Please read our Full Sub Rules before resubmitting.
If you believe this was a mistake, please message the moderators.
###Do not respond to this comment - you will not receive a response.